Installation Instructions

CoolSun Skylight Shade installation is done from the outside on your roof and is easy.

Start from an upper corner of your skylight and position a corner of the shade so that the bungee cord fits under the skylight frame. Then secure the opposite bottom, diagonal corner. Next, secure the other two corners in the same way.

Because of the curvature of domed skylights, the bungee cord may not fit exactly under the frame on the sides and is typical. As long as the bungee cord is secured under the frame at the corners, the cover will remain in place during most extreme windy weather conditions.

The corners of our product are designed to be open and exposes the bungee cord for easier attachment. The fabric we use is very durable and will not rip or tear.

In some cases, it may be necessary to adjust the material by pulling the edges of the cover down around the skylight frame to get the smoothest effect.

When you receive the skylight screens, there will be some folding and wrinkling in the material due to the packing process. This is normal. After installation, over time the wrinkles will relax and become more smooth.

Please don't hesitate to contact us if you have any questions about installation.

 

Care and Cleaning

If you wish to clean the covers, simply use water and a mild detergent. The material used for the product is designed for outdoor use and is very durable and should last for many years.